Description
Data
Features
Set contents
Downloads
Description
The PowerExpander SRS makes it possible to exploit all the channels provided by your radio control system when using small satellite receivers. Safety is also significantly enhanced, because two receivers can be connected to the PowerExpander SRS.
The integral Serial Receiver System selects any receiver, and - if an error should occur - switches over automatically to the receiver which is still operating. This represents a simple method of doubling the number of receiver aerials.
The unit is fitted with a high-current socket to ensure that the power supply can cope with the large number of channels which it makes available. It also features an output carrying the S-BUS signal, which makes it possible to use any radio control system in conjunction with an S-BUS wiring arrangement.
As powersupply we recommend the PowerBox Source or the PowerBox Sensor V3.
Data
| Operating voltage | 4.0V - 9.0V |
| Power supply | 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiCd/NiMH |
| Current drain Power-on state | 25mA |
| Maximum load current | Peak 30A |
| Signal input | serial |
| Supported RC systems | PowerBox, Futaba, MPX, Jeti, Spektrum, JR, Graupner |
| Receiver redundancy | SRS |
| Channels | 18 |
| Servo sockets | 18 |
| Servo signal resolution | 0.5µs |
| Dimensions | 55 x 40 x 14 mm |
| Weight | 25 g |
| Temperature range | -30°C to +75°C |
Features
+ Access to a maximum of eighteen channels
+ Simple wiring: the receivers are connected using a serial link
+ Integral SRS, allowing the use of two receivers
+ Compatible with: PowerBox, Futaba, Multiplex, Jeti, Spektrum, JR and Graupner
+ High-current power socket Deans
+ S-BUS output for use in a BUS system
+ Hold/Failsafe option for each output individual
+ User-variable frame rate
+ Can be updated using the MobileTerminal or USB Interface
Set contents
+ PowerExpander SRS
+ 2x Patch-lead 18cm
+ Self-adhesive pad
+ Operation instruction in German and English
